Information on advice, support, where to buy Air Compressors

Post by: Admin Dept: BBT Nôi dung máy nén khí Date posted: 08/06/2016

This is the most important equipment for compressed air system (it is considered as the heart, system), because Compressors Direct to produce compressed air supply to the devices and locations in need using compressed air.

Post by: Admin Dept: BBT Nôi dung máy nén khí Date posted: 08/06/2016

Control mode provides gas load / no load

This mode refers to the control input of air through the valve gate into. That is, when the pressure reaches the upper limit, the valve inlet closes and the compressor will go into a state of no-load operation; when the pressure

Post by: Admin Dept: BBT Nôi dung máy nén khí Date posted: 08/06/2016

Effects and properties of lubricants

viscosity plays an important role in the properties of engine oils. If assessed according to the SAE viscosity oil with the letter "W" is the kind of multi-level, used in all seasons. When classified according to API features, the characters after the "S" or "C" with the larger order of the alphabet as possible

Post by: Admin Dept: BBT Nôi dung máy nén khí Date posted: 08/06/2016

Use power-saving inverter

An energy audit is an activity to assess ng reality of the activity status of n antenna l A network can drink to determine villages Arrivals elements using waste energy

Post by: Admin Dept: BBT Nôi dung máy nén khí Date posted: 08/06/2016

RELEVANCE OF PNEUMATICS

Drive motors with high capacity compressed air energy costs very high. If you compare the cost of the electricity consumption of a rotary engine with power

Post by: Admin Dept: BBT Nôi dung máy nén khí Date posted: 08/06/2016

Screw air compressor

Compressors use circular motion of screw, use Puli is connected to the screw 02 presses air into the small volume hon.Chung used in the industrial production sector, be it fixed or mobile type dynamic.

Post by: Admin Dept: BBT Nôi dung máy nén khí Date posted: 08/06/2016

Chế độ điều khiển tốc độ quay motor

Adjust flow by changing the rotational speed of the compressors , while keeping unchanged the open valve (normally open to maintain maximum).

Post by: Admin Dept: BBT Nôi dung máy nén khí Date posted: 08/06/2016

SỰ PHÁT TRIỂN CỦA KỸ THUẬT KHÍ NÉN

THE DEVELOPMENT OF TECHNICAL PNEUMATICS

Post by: Admin Dept: BBT Nôi dung máy nén khí Date posted: 08/06/2016

Mode motor rotation speed control

This is a method of scientific control using a variable frequency controls the rotational speed of the compressors with power saving purposes. The following parameters are known based on the performance characteristics of the compressor.

Post by: Admin Dept: BBT Nôi dung máy nén khí Date posted: 08/06/2016

THE CHARACTERISTICS OF PNEUMATIC

- In terms of quantity: available everywhere should be able to use the infinite quantities. - About shipping: compressed air can be transported easily in the pipeline, with a certain distance. The pipeline of unnecessary because after using compressed air will be vented to the outside environment after you have done the work.

Post by: Admin Dept: BBT Nôi dung máy nén khí Date posted: 08/06/2016

Advantages and disadvantages of drivetrain Pneumatic

- Due to compression (elastic) big air, so it can be easily extracted container. Thus, the likely applications for the establishment of a gas compressor station criticized

Post by: Admin Dept: BBT Nôi dung máy nén khí Date posted: 08/06/2016

How to rationalize pressure compressor

After the survey, experts ECC made solutions. Separating the spray using compressed air (10%) and the compressed air supply for the actuators (10%) with compressed air for the furnace section pasteurized (80%) according to the following options

Post by: Admin Dept: BBT Nôi dung máy nén khí Date posted: 08/06/2016

The theoretical basis of compressed air

The theoretical basis of compressed airt tại đây

Post by: Admin Dept: BBT Nôi dung máy nén khí Date posted: 08/06/2016

Some solutions to save energy

First thing to note for the compressed air system pressure drop pressure loss is a phenomenon that reduces the pressure from the air compressor to use protection.

Post by: Admin Dept: BBT Nôi dung máy nén khí Date posted: 08/06/2016

Situation usual air compressor system

For many industries, compressed air supply system has an important role, system This system typically consumes considerable energy.

Danh mục giải pháp

Danh mục giải pháp

Contact us

Connect with us