How to rationalize pressure compressor

Post by: Admin Dept: BBT Nôi dung máy nén khí Date posted: 08/06/2016

After the survey, experts ECC made solutions. Separating the spray using compressed air (10%) and the compressed air supply for the actuators (10%) with compressed air for the furnace section pasteurized (80%) according to the following options:
The compressed air supply for the pasteurization oven is provided separately from the current 1 compressor.
the compressed air supply to the actuator can be in 2 ways: 1 Use the remaining compressor (installed in 5.5 -6.5 kg / cm2) or private investors a small compressor with adequate capacity (machines around 5HP).
the compressed air supply to the spray: use common current remaining compressor (installed in 5 5 - 6.5kg / cm2) or general use more private investment compressor (this time with a capacity to power around 10 Hp) or use water directly compressors used for spray (capacity about 3 Hp).
Install pressure pneumatic system components provide the pasteurization oven from 5.5-6.5 kg / cm2 down 1.5-2.5 kg / cm2.
Replace the engine compressors for the pasteurization oven electric power from 30
kW to 18.5 kW or 30 kW engine unchanged but installing inverter motor power control. The plan for this change, the investment cost of 110 million. Meanwhile, each year
saves businesses 76 million. Thus, after 17 months of enterprises recovered their investment.
The solution for saving electricity and gas compressors .

Font size

Comments

Latest Posts

Screw air compressor

Compressors use circular motion of screw, use Puli is connected to the screw 02 presses air into the small volume hon.Chung used in the industrial production sector, be it fixed or mobile type dynamic.

Air compressor

This is the most important equipment for compressed air system (it is considered as the heart, system), because Compressors Direct to produce compressed air supply to the devices and locations in need using compressed air.

Some solutions to save energy

First thing to note for the compressed air system pressure drop pressure loss is a phenomenon that reduces the pressure from the air compressor to use protection.

Situation usual air compressor system

For many industries, compressed air supply system has an important role, system This system typically consumes considerable energy.

Mode motor rotation speed control

This is a method of scientific control using a variable frequency controls the rotational speed of the compressors with power saving purposes. The following parameters are known based on the performance characteristics of the compressor.

Posted News

Sửa chữa máy nén khí

06/06/2016

Bảo dưỡng máy nén khí

06/06/2016

D series Dryclon suction regulator

08/06/2016

How to rationalize pressure compressor

Comments

Danh mục giải pháp

Danh mục giải pháp

Contact us

Connect with us