Post by: Admin   Dept: BBT Nôi dung máy nén khí   Date posted: 08/06/2016
This mode refers to the control input of air through the valve gate into. That is, when the pressure reaches the upper limit, the valve inlet closes and the compressor will go into a state of no-load operation; when the pressure

Post by: Admin   Dept: BBT Nôi dung máy nén khí   Date posted: 08/06/2016
Adjust flow by changing the rotational speed of the compressors , while keeping unchanged the open valve (normally open to maintain maximum).

Post by: Admin   Dept: BBT Nôi dung máy nén khí   Date posted: 08/06/2016
This is a method of scientific control using a variable frequency controls the rotational speed of the compressors with power saving purposes. The following parameters are known based on the performance characteristics of the compressor.

Post by: Admin   Dept: BBT Nôi dung máy nén khí   Date posted: 08/06/2016
After the survey, experts ECC made ​​solutions. Separating the spray using compressed air (10%) and the compressed air supply for the actuators (10%) with compressed air for the furnace section pasteurized (80%) according to the following options

Post by: Admin   Dept: BBT Nôi dung máy nén khí   Date posted: 08/06/2016
First thing to note for the compressed air system pressure drop pressure loss is a phenomenon that reduces the pressure from the air compressor to use protection.

Post by: Admin   Dept: BBT Nôi dung máy nén khí   Date posted: 08/06/2016
For many industries, compressed air supply system has an important role, system This system typically consumes considerable energy.
Latest Posts
Compressors use circular motion of screw, use Puli is connected to the screw 02 presses air into the small volume hon.Chung used in the industrial production sector, be it fixed or mobile type dynamic.
This is the most important equipment for compressed air system (it is considered as the heart, system), because Compressors Direct to produce compressed air supply to the devices and locations in need using compressed air.
First thing to note for the compressed air system pressure drop pressure loss is a phenomenon that reduces the pressure from the air compressor to use protection.
After the survey, experts ECC made ​​solutions. Separating the spray using compressed air (10%) and the compressed air supply for the actuators (10%) with compressed air for the furnace section pasteurized (80%) according to the following options
For many industries, compressed air supply system has an important role, system This system typically consumes considerable energy.
Posted News

Contact us

Phu Tin Co. LTD
 Binh Duong Boulevard - Thoi Hoa Commune Hamlet 3 - Ben Cat - Binh Duong. 
0650.3555108 - 0933 384 579
0650.3555109
http://maynenkhi.pro.vn 
phutin@vnn.vn , sales@phutin.com

Connect with us

Copyright © 2016 Phutin Co., Ltd. All Rights Reserved.